Premier Equine Miletto Vinci Waterproof Country Boot
Premier Equine Miletto Vinci Waterproof Country Boot
The Miletto is a fully waterproof leather country boot made from durable, breathable and hard-wearing leather. The upper construction of the boot is made from a high-quality synthetic suede with an elastic lace closure and stopper, allowing you to tailor the fit of the boot. This upper calf closure allows you to secure the boot below the knee, reducing the risk of unwelcome forage, bedding and debris entering your boot.
A technical material lines the ladies boots, wicking away moisture and helping to regulate temperature. Within the construction of the design is a waterproof membrane, providing 360˚ all-round protection from the elements; allowing you to brace the weather and terrain without hesitation.
These ladies country boots are set on a hybrid sole - suitable for horse riding, equestrian activities, and country pursuits. The innovative sole and insole retains a dual density foam cushioning system - anatomically designed to reduce strain on the foot. The non-slip tread allows for secure footing on most outdoor surfaces and in the stirrups. These waterproof country boots offer all-day comfort, support and performance on the yard and in the field.
- Premium grade leather construction
- HydroGuard waterproof membrane
- Synthetic suede upper construction
- Elastic lace closure with stopper
- Cushioned ankle zone
- Full arch support
- Anti-slip tread
- Rubber sole
- Comfort insole
- Debossed PE branding
Care Instructions:
Use a boot jack to remove. Using the other boot to hold it down and get you foot out risks damage to the sole and it will start pulling away. Boot jacks are available HERE
Firstly we recommend you test all products used during the cleaning process on a concealed patch of leather to make sure they are compatible and ensure that they give the desired finish.
Use a soft bristled brush or damp sponge to gently remove the dirt build up from around the boot. Pay particular attention to the rim of the sole.
Rinse a cloth in clean lukewarm water and gently wring it out, leaving a fair amount of moisture within it.
We then recommend the use of a self-foaming footwear cleaner. Apply foam to the entire outer boot sparingly and carefully wipe away any remaining dit using a soft circular motion - this will prevent streaking marks.
Using a clean cloth wipe away any excess foam.
Leave leather to dry naturally away from direct heat sources.
You may wish to apply a specialist leather wax or cream formula which will help preserve the leather's properties.
As a finishing product we recommend the application of a protective spray which will help to guard the leather against water, stains, and most importantly urine, which can degrade leather over time.
Care Instructions:
Firstly we recommend you test all products used during the cleaning process on a concealed patch of leather to make sure they are compatible and ensure that they give the desired finish.
Use a soft bristled brush or damp sponge to gently remove dirt build up from around the boot.
Rinse a cloth in clean lukewarm water and gently wring it out, leaving a fair amount of moisture within it.
We then recommend the use of self-foaming footwear cleaner. Apply foam to the entire outer boot sparingly and carefully wipe away any remaining dirt using a soft circular motion - this will prevent streaking marks.
Using a clean cloth wipe away excess foam.
Leave leather to dry naturally away from direct heat sources.
You may wish to apply a specialist leather wax or cream formula which will help preserve the leathers properties.
As a finishing product we recommend the application of a protective spray which will help guard the leather against water, stains and most importantly urine, which can degrade leather over time.